SLDL5525 Steam Compensation Guided Wave Radar
The SLDL5525 Steam Compensation Guided Wave Radar is suitable for continuous level measurement under extreme working conditions. The guided wave radar level sensor uses a ceramic-sealed process connection to ensure safe use in high-temperature and high-pressure applications, such as for level measurement of steam boilers and toxic media (such as liquid ammonia).
- Product Introduction
Product Overview
The SLDL5525 Steam Compensation Guided Wave Radar is suitable for continuous level measurement under extreme working conditions. The guided wave radar level sensor uses a ceramic-sealed process connection to ensure safe use in high-temperature and high-pressure applications, such as for level measurement of steam boilers and toxic media (such as liquid ammonia). In the measurement of liquid level with a high-pressure gas phase, only the SLDL5525 guided microwave level transmitter with steam compensation technology can provide accurate and reliable measurement results. The measurement is stable and reliable, and is not affected by liquid level fluctuations, foam or medium changes.
Advantages
•Steam Compensation Guided Wave Radar maintains reliable measurement even under variable measurement product or process conditions
•LCD intuitive display, fast and convenient commissioning, maintenance and diagnosis
•Guided wave radar level sensor multi-echo tracking innovative technology, bringing high reliability to the measurement results
• Hardware and software are developed according to IEC 61508 standards and reach SIL3 level
Typical applications
The SLDL5525 Steam Compensation Guided Wave Radar is used in water storage tanks, acid and alkali storage tanks, slurry storage tanks, solid particles, and small oil storage tanks. All kinds of conductive, special dielectric, corrosive media. Such as coal bunkers, ash bunkers, oil tanks, acid tanks, etc.
Product parameters:
Application: drum high and low heating, condenser and other scenes; in some extremely high temperature and high pressure, high saturated steam conditions
Measurement range: rod 6m; coaxial 6m
Measurement accuracy: ±1mm
Process temperature: (-200～450)℃
Process pressure: (-0.1～41.3)MPa
Signal output: 4-20mA/HART two-wire/four-wire, Profibus PA, Foundation Fieldbus, Modbus protocol, GPRS/CDMA remote, Bluetooth (optional)
On-site display: LCD display
Process connection: G1 1/2A/G2A/1 1/2NPT/flange (optional)
Product installation:
1. The guided wave radar level sensor should be kept as far away from the discharge port and the feed port as possible;
2. For metal tanks and plastic tanks, it is not allowed to touch the tank wall during the entire measurement process and within the measurement range; if it is a metal tank, the level meter cannot be installed in the middle of the tank;
3. The guided microwave level transmitter instrument is suitable for installation at one-fourth of the diameter of the silo, and the cable probe and rod probe are not less than 30mm away from the tank wall;
4. The bottom of the probe is about 30mm away from the bottom of the tank;
5. The minimum distance between the probe and the obstacles in the tank is not less than 200mm;
6. If the bottom of the container is conical, the steam compensation guided wave radar can be installed in the middle of the tank top.
Hot Tags: sldl5525 steam compensation guided wave radar, China sldl5525 steam compensation guided wave radar manufacturers, suppliers, factory, oxygen analyzer zirconia type, ultrasonic level meter, radar level indicator transmitter, Extermal Mount Density Meter, RF Admittance Level Switch, Fork Density Meters
