Flange Mounted Differential Pressure Transmitter SLDP3351-LT

Solidat Applied Technologies Ltd. is one of the leading manufacturers and suppliers of flange mounted differential pressure transmitter sldp3351-lt in China, also supports customized service. Please feel free to buy high quality products in stock here and get quotation from our factory. Good service and reasonable price are available.

 

SLDP3351-LT single flange mounted differential pressure transmitter is a new transmitter of SOLIDAT company. The whole machine has been strictly assembled and tested. The flanged pressure transmitter product has the characteristics of advanced design principle, complete varieties and specifications, and easy installation and use.

The flange mounted pressure transmitter can measure the liquid level and density of various containers with precision. There are two types: flat flange and plug-in flange, which are suitable for the measurement of high-viscosity medium or suspension liquid.

 

●Super measurement performance, used for pressure, differential pressure, liquid level, flow measurement

●Digital accuracy: ±0.05% single flange remote liquid level gauge

●Accuracy: ±0.2% (this is the basic reference accuracy of the flange)

●Stability: ±0.1% of the upper limit of the range/10 years

●Turndown ratio: 100:1

●Measurement rate: 0.2S

●Miniature all stainless steel flange, easy to install

●The process connection is compatible with other products to achieve the best measurement

●Standard 4-20mA, with digital signal based on HART protocol, remote control

●Support the upgrade to fieldbus and technology based on field control.

 

◆ Liquid measurement:

When measuring liquid flow, the pressure tap should be opened on the side of the process pipeline to avoid sedimentation of dross. At the same time, the flange mounted differential pressure transmitter must be installed

Installed next to or below the pressure tap so that air bubbles can be discharged into the process pipe.

◆ Gas measurement:

When measuring gas flow, the pressure tap should be opened on the top or side of the process pipeline. And the flange mounted pressure transmitter should be installed in the process pipeline

side or above so that accumulated liquid can easily flow into the process piping.

◆ Steam measurement:

When measuring the steam flow, the pressure tap is opened on the side of the process pipe, and the flanged pressure transmitter is installed under the pressure tap so that the condensate can fill the pressure pipe.

It should be noted that when measuring steam or other high-temperature media, the temperature should not exceed the limit temperature of the transmitter.

When the measured medium is steam, the pressure guiding tube should be filled with water to prevent the steam from directly contacting the transmitter, because the transmitter works

During operation, the volume change is negligible, so there is no need to install a condensation tank.

Note: When using a transmitter with a pressure chamber equipped with a relief valve, the pressure tap should be opened on the side of the process pipe. The measured medium is liquid

When the body is used, the discharge valve of the transmitter should be installed on it to discharge the gas infiltrated in the measured medium. When the measured medium is gas,

The relief valve of the pressure transmitter should be installed below to allow the accumulated liquid to drain.

Hot Tags: flange mounted differential pressure transmitter sldp3351-lt, China flange mounted differential pressure transmitter sldp3351-lt manufacturers, suppliers, factory, Pressure, Capacitive Pressure Sensor, Pressure Level Transmitter, Differential Pressure Level Transmitter, Diaphragm Pressure Transmitter, Pressure Series