High Temperature Pressure Sensor SLDP3351-ST
SLDP3351-ST series high temperature pressure sensor is SOLIDAT adopts advanced monocrystalline silicon high pressure transmitter technology and packaging process. The high frequency pressure transducer is located on the top of the metal body, away from the medium contact surface, to achieve mechanical isolation and thermal isolation;
- Product Introduction
Solidat Applied Technologies Ltd. is one of the leading manufacturers and suppliers of high temperature pressure sensor sldp3351-st in China, also supports customized service. Please feel free to buy high quality products in stock here and get quotation from our factory. Good service and reasonable price are available.
SLDP3351-ST series high temperature pressure sensor is SOLIDAT adopts advanced monocrystalline silicon high pressure transmitter technology and packaging process. The high frequency pressure transducer is located on the top of the metal body, away from the medium contact surface, to achieve mechanical isolation and thermal isolation; the sensor leads integrated with glass sintering realize high-strength electrical insulation from the metal base, improving the flexibility and transient voltage resistance of electronic circuits ability to protect.
SOLIDAT high pressure transmitter adopts intelligent signal processing chip, its processing resolution, power consumption, speed, effective bit and accuracy and other indicators will greatly improve the performance of the transmitter, ensuring the stable, accurate and fast loosening of the sensor model with transmission. The high temperature pressure sensor provides high precision, within the measurement range of -10~10MPa, it can perform high-accuracy measurement, and the maximum single-sided overpressure can reach 16MPa. It is used to measure liquid, gas, density and pressure, and is widely used in petroleum, chemical, steel, electric power, environmental protection, food and other industries.
Output signal: 4...20mA HART protocol, two-wire system
Allowable load resistance: 0~600Ω (24V DC)
Note: A standard (250Ω) load resistor is required to communicate with a handheld communicator.
Power supply: general purpose: 10.5~45V DC; intrinsically safe explosion-proof: 10.5~26V DC
Communication line conditions: line length: up to 2km (0.75~1.25mm2 control instrument cables, use twisted pair cables when exceeding 1km)
Maximum power consumption: supply voltage x22.8
Load resistance: 250~600Ω (24VDC, including cable resistance)
Load capacitance: below 0.55mF
Load inductance: below 3.3mH
Interval between power lines: 15cm or more (please avoid parallel wiring)
Saturation current: upper limit 20.8mA lower limit 3.8mA
Alarm current: upper limit 22.8mA lower limit 3.6mA (mode can be set)
Adjustment function: Zero point and full scale point can be adjusted locally through the three buttons on the top of the shell or remotely adjusted by configuration software
Wireless adjustment function: through the DERSON APP communicator, connect to the mobile phone APP for wireless adjustment
Zero shift: can shift within the range of -20% to +20% of the maximum range
Output mode: linear output
(Remote adjustment can be performed through configuration software)
Ambient temperature: -40~+85℃
Process temperature: -40~+120℃
Storage temperature: -40~+90℃
Weather resistance:: DIN40040GPC
EMC applicable standard: ENC61326-1 : 2006
Hot Tags: high temperature pressure sensor sldp3351-st, China high temperature pressure sensor sldp3351-st manufacturers, suppliers, factory, Pressure Level Transmitter, Diaphragm Pressure Transmitter, Capacitive Pressure Sensor, Pressure Series, Differential Pressure Level Transmitter, Pressure
