(GaugerBAT) Battery Pack And (PTS) Programmable Timer Switch/Barrier

Solidat Applied Technologies Ltd. is one of the leading manufacturers and suppliers of (gaugerbat) battery pack and (pts) programmable timer switch/barrier in China, also supports customized service. Please feel free to buy high quality products in stock here and get quotation from our factory. Good service and reasonable price are available.

 

GaugerBAT Intrinsic Safe Battery Pack for Hazardous explosive areas

1、A battery enclosure for 3 or 4 LiSOCl2 cells

2、External protecting circuit device

3、Nominal voltage 10.8 VDC or 14.4 VDC

4、Capacity of 19AH

5、Enclosure sealing rate IP67

Battery powered

applications in explosive

atmosphere environment.

 

GaugerBAT and PTS are accessories for:

Low-power mode operation of GaugerGSM

ATEX/IECEx Intrinisc Safe operation of GaugerGSM in hazardous explosive areas

 

LOW POWER MODE DESCRIPTION

Low power mode is activated when GaugerGSM is electrically fed by GaugerBAT and PTS. In this mode, system follows four steps:

PTS keeps GaugerGSM "OFF" for a sleeping-interval of time

When sleeping-interval is over, PTS turns GaugerGSM to "ON"

GaugerGSM takes measurements and transmits data

PTS turns GuagerGSM to "OFF"

 

LOW POWER MODE VARIANTS

Two variants are supported:

Three pre-configured sleeping time intervals. Interval depends on level. Typically, long sleeping interval (e.g. 4 hours) for low levels, shorter interval (e.g. 30 minutes) at mid levels and short intervals (3 minutes) at high measured level.

Same as above for measurement but data is logged (up to 200 points) and transmitted in one burst.

 

LOW POWER MODE ADVANTAGES

Main advantage for using low power mode - extending battery life-time. In this mode real time alerts are not supported. Settings of sleeping-intervals are defined by a USB command LPST.

Example:

With a 4-cell GaugerBAT holding TL-5930 batteries, sleeping time interval of one hour, SMS based operation and good cellular network coverage - 2 years of operation can be expected before battery replacement.

 

INTRINSIC SAFE DESCRIPTION

GaugerBAT is a battery pack certified for use in hazardous (explosive atmosphere) locations. Pack is designed to power equipment in locations where a power is not available. Equipment comprises two interconnected parts: Battery enclosure containing 3 or 4 LiSOCl2 cells and protecting circuit (PTS).

Dimension of the battery enclosure are 8(h) x 16 x 14 cm3. Nominal voltage of 10.8V or 14.4V and capacity of 19AH. Required batter cell is Tadiran TL-5930.

 

INTRINSIC SAFE CERTIFICATIONS

ATEX/IECEX: Ex II 2G, Ex ib IIB T3 (162°C) Gb, Ta=-30°C to +70°C. MUST be used with Tadiran cells TL-5930.

Battery enclosure must be connected to equipment via PTS. Capacitance/inductance of equipment are restricted.

 

INTRINSIC SAFE ZONES

Allowed for use in ATEX zones 1 or zone 2 (IS). Download and carefully read ATEX / IECEx CERTIFICATIONS for GaugerBAT!

 

Hot Tags: (gaugerbat) battery pack and (pts) programmable timer switch/barrier, China (gaugerbat) battery pack and (pts) programmable timer switch/barrier manufacturers, suppliers, factory, Ultrasonic Level Indicator, Ultrasonic, Ultrasonic Tank Level Sensor Marine