Single-flange Remote Differential Pressure Flow Transmitter SLDP3351-LGP
The single-flange remote differential pressure flow transmitter is a differential pressure flow meter type (structural measurement method) that is used to avoid the measured medium directly acting on the remote transmission isolation diaphragm of the transmitter.
- Product Introduction
Solidat Applied Technologies Ltd. is one of the leading manufacturers and suppliers of single-flange remote differential pressure flow transmitter sldp3351-lgp in China, also supports customized service. Please feel free to buy high quality products in stock here and get quotation from our factory. Good service and reasonable price are available.
The single-flange remote differential pressure flow transmitter is a differential pressure flow meter type (structural measurement method) that is used to avoid the measured medium directly acting on the remote transmission isolation diaphragm of the transmitter. Connect the measurement diaphragm chamber of the electronic dp transmitter with a stainless steel capillary (a pipe with a diameter of about 3mm, plus protection) to one or two (pressure or differential pressure) ranging from a few meters to tens of meters to make a flange form In the measuring bellows, the middle is filled with a conductive medium (silicon oil), and the differential pressure transmitter manufacturers connect the flange to the equipment when using it, and then the measurement can be performed.
Diaphragm seal differential pressure transmitter is suitable for the need to isolate the high-temperature medium from the transmitter; the measurement medium has a corrosive effect on the sensitive components of the transmitter; the measured medium solidifies or crystallizes due to environmental or temperature changes; the replacement of the measured medium requires strict purification measurement head; suspended liquid or high viscosity medium; measuring head must be kept clean; sealed pressure vessel measurement.
product description:
SLDP3351-LGP series differential pressure flow transmitter uses the principle of differential capacitance detection. When the pressure on both sides is inconsistent, it will cause the displacement of the measuring diaphragm in the chamber. The displacement is proportional to the pressure difference, and the capacitance change is converted into 4-20mA two-wire current signal. The diaphragm differential pressure transmitter has strong anti-vibration, range, zero and damping field continuously adjustable.
Features:
1. IP67 protection level, non-destructive testing, salt spray testing, dustproof, anti-spray
2. Adopt 316L cast steel material and high-precision stainless steel structure to realize all-solid design
3. Standard three-wire terminal block, convenient wiring, firm installation and stable measurement performance
Technical Parameters:
Product model: SLDP3351-LGP
Measuring range: -0.1~ 10MPa
Output signal: 4...20mA HART protocol, two-wire system
Suitable medium: gas, liquid, etc.
Material type: 316L stainless steel
Ambient temperature: -40~+85℃
Process temperature: According to the characteristics of the sealing liquid of the remote flange
Storage temperature: -40~+90℃
Power supply: general purpose: 10.5~45V DC; intrinsically safe explosion-proof: 10.5~26V DC
Accuracy grade: ±0.2% (this is the basic reference accuracy of the flange)
Protection level: ordinary type IP67, diving type IP68
Hot Tags: single-flange remote differential pressure flow transmitter sldp3351-lgp, China single-flange remote differential pressure flow transmitter sldp3351-lgp manufacturers, suppliers, factory
