SLDA9310 Zirconia Oxygen Analyzer
The explosion-proof zirconia oxygen analyzer is an instrument used to measure the oxygen concentration contained in flue gas and other non-flammable gases during the combustion process.
- Product Introduction
Solidat Applied Technologies Ltd. is one of the leading manufacturers and suppliers of slda9310 zirconia oxygen analyzer in China, also supports customized service. Please feel free to buy high quality products in stock here and get quotation from our factory. Good service and reasonable price are available.
The explosion-proof zirconia oxygen analyzer is an instrument used to measure the oxygen concentration contained in flue gas and other non-flammable gases during the combustion process. This kind of measurement is a direct plug-in online measurement, that is, the oxygen sensor is installed on the top of the probe, and the probe is inserted into about 1/3 of the flue, so that the oxygen sensor is located in the flue gas being measured. The measured gas (flue gas) enters the flue gas side of the oxygen sensor through the filter. The other side of the oxygen sensor is a continuous reference gas (clean, dry, oil-free instrument gas, containing oxygen by default) that passes through the inner core of the probe. 20.6%) This creates an oxygen concentration difference on both sides of the oxygen sensor.
| Measurement Principle | Zirconia |
| Flue Gas Pressure | -10 to +10KPa |
| Flue Gas Flow Velocity | 0 - 50m/s |
| Ambient Temperature | -40°C ~ +80°C |
| Response Time | 0.5s (flue gas flow velocity >10m/s) |
| T90 Time | Less than 5s (flue gas flow velocity >10m/s) |
| Probe Material | 316Ti |
| Protection Class | IP66 |
| Battery Resolution | <1ppm |
| Accuracy | ±1% of the measuring range or ±0.2% of the displayed value |
| Heating Power Supply | 115V provided by the transmitter |
application:
Hot Tags: slda9310 zirconia oxygen analyzer, China slda9310 zirconia oxygen analyzer manufacturers, suppliers, factory
