SLDL5521 Rod-type Guided Wave Radar

Rod-type guided wave radar level meter has the advantages of low maintenance, high performance, high accuracy, reliability, and long service life. The transmission of microwave signals is not affected by the atmosphere, so the guided microwave level transmitter can meet the requirements of harsh environments such as volatile gases, high temperatures, high pressures, steam, vacuum and high dust during the process, and can continuously monitor different material levels. Measurement.

Use the SLDL5521 guided radar type level transmitter to complete various liquid contact measurements without maintenance. Even in applications where steam, deposits, foam or condensation are present, the rod-type guided wave radar sensor provides accurate and reliable measurements, even in risers or bypass pipes. The results are precise and reliable.

 

•The debugging process is simple and does not require adding materials to the container or completely emptying it, thus saving time.

•Comprehensive diagnostic functions: ensuring maintenance-free work and high plant availability

•Guided wave radar is known for its versatility and is used in various industries. Whether it is a storage tank or a waveguide, whether it is asphalt or liquefied gas, whether it is liquid level or interface, the SLDL5521 rod-type guided wave radar can accurately measure it.

•Guided radar type level transmitter provides accurate and reliable measurement values ​​for further control or protection equipment, such as:

▫Measuring liquid ammonia storage tank level

▫Measuring the material level in the satellite waveguide

▫Measure the interface in storage tanks, bypass pipes, and stilling pipes

 

Brand: SOLIDAT

Scope of application: liquid and solid measurement

Measuring range: cable: 75m/rod: 6m

Measurement accuracy: ±2mm

Working environment temperature: -40°C~150°C

Working environment pressure: -1~40bar (-100~4000KPa)

Signal output: 4-20mA/HART two-wire/four-wire, Profibus PA, Foundation Fieldbus, Modbus protocol, GPRS/CDMA remote, Bluetooth (optional)

Process connection: G1 1/2A/G2A/flange (optional)

Detection component material: stainless steel 304, 316L/PTFE (optional)

Shell material: aluminum

 

•The rod-type guided wave radar should be installed as far away from the discharge port and the feed port as possible.

•The metal can does not touch the wall or bottom of the can within the entire measuring range.

•It is recommended to install it at 1/4 or 1/6 of the silo diameter, and the minimum distance from the tank wall is 1/10 of the measuring range.

•The minimum distance between the cable or rod probe and the tank wall is ≥300mm.

•The distance between the bottom of the probe and the bottom of the tank is ≥30mm.

•The minimum distance between the probe and the obstacles in the tank is ≥200mm.

•If the bottom of the container is tapered, the center of the tank top can be installed.

 

Hot Tags: sldl5521 rod-type guided wave radar, China sldl5521 rod-type guided wave radar manufacturers, suppliers, factory, zirconium oxide oxygen analyzer, Radar Tank Gauge, ultrasonic oil monitor, capacitance level sensor, zirconia gas analyzer, vibrating tuning fork level switch