How To Properly Plan And Install Guided Wave Radar Type Level Transmitter

The guided wave radar type level transmitter is a common industrial process control and measurement instrument. Guided wave radar level sensors use microwave signals to measure the level or level of liquid or solid materials. Through the propagation of microwave signals in the medium, the signals are reflected back when they encounter the surface of the medium. This time interval can be used to calculate the height of the liquid level or material level. Compared with traditional liquid level gauges, High temperature and high pressure guided wave radar has greater accuracy and stability. It can accurately measure various liquid and solid materials without being affected by factors such as medium density, temperature, pressure and viscosity.

The guided wave radar type level transmitter is suitable for multiple applications, including water liquid storage tanks, acid and alkali storage tanks, slurry storage tanks, solid particles and small oil storage tanks. It is suitable for the measurement of conductive and non-conductive media as well as corrosive media, such as coal bunkers, ash silos, oil tanks and acid tanks, etc.

Before installing the guided wave radar level sensor, some preparations need to be done:

1. Please ensure that there are no interference objects directly below the installation location to avoid errors in the measurement of the guided wave radar level gauge.

2. Sufficient installation space needs to be reserved to ensure that the instrument can be installed normally.

3. The signal converter needs to be protected from exposure to strong sunlight. If necessary, a protective cover can be installed.

4. It is necessary to avoid installation in places with strong vibration.

5. If multiple SLDL5500 series Guided wave radar level gauges need to be installed on the same container, reasonable planning and arrangements are required.

6. To ensure quick, convenient and safe installation of guided wave radar type level transmitter, please follow the installation guide below.