Focus On Silicon Steel Production: How To Correctly Measure Magnesium Oxide Coating Liquid?

The steel industry is one of the basic industries of our country, and the silicon steel production line is an important part of it. In the process of silicon steel production, the measurement and monitoring of coating liquid and acid liquid and other media are crucial. Here, let's focus on the measurement of magnesium oxide coating liquid.

Magnesium oxide coating liquid is a highly viscous coating liquid, so when using the magnesium oxide coating liquid radar level meter for measurement, some issues need to be paid attention to. In order to avoid the coating adhering to the detection component and affecting the measurement effect, we recommend the use of non-contact radar level meter for measurement.

In addition, on the silicon steel production line, the magnesium oxide circulation tank and the liquid distribution tank are usually cylindrical concave storage tanks made of carbon steel. If the improper location and installation method are selected, multiple false echoes are likely to be generated. According to the company's on-site application case, the steel enterprise installed the magnesium oxide coating liquid radar level meter about 20cm away from the wall of the magnesium oxide coating liquid storage tank, resulting in multiple interference signals. Later, the installation position was moved about 10cm to the center of the tank, and the interference signal disappeared immediately.

From this typical example, it can be seen that no matter what liquid is measured, multiple tests are required to ensure accuracy. In addition, in addition to paying attention to the shape of the storage tank, it is also necessary to pay attention to whether there are auxiliary facilities in the storage tank. Some storage tanks are equipped with stirring devices, so when choosing the installation location of the magnesium oxide coating liquid radar level meter, it is necessary to consider the interference caused by the operation of the stirrer and try to avoid the influence of the tank wall and obstacles. If some interference cannot be avoided, it can be solved by debugging the software. At the same time, accurate steel plant radar measurement of magnesium oxide coating liquid level measurement is not only related to the quality and efficiency of silicon steel production, but also equally important. Therefore, liquid level measurement is quite critical in this step. We must be positive and continue to work hard to improve measurement accuracy.