Radar Technology Optimizes Dust Removal Slurry Tank Measurement

In the sintering system, in addition to the core equipment of the sintering machine, there are also a variety of auxiliary facilities. These equipment and facilities usually use radar level gauges and radar level gauges for level and material level measurement, such as the dust removal slurry tank in the dust removal system.

The main components of the dust removal slurry tank include the tank body, stirring device, water spray device, radar level gauge and slurry concentration meter. When measuring the level of the radar level gauge, special attention should be paid to the following working conditions:

1. The dust recovered by the dust removal device may bring a lot of dust, so when installing the storage tank radar level meter, avoid the feed port.

2. Condensation may occur in winter, resulting in large fog in the tank, especially in smaller tanks, which may affect the measurement accuracy. When choosing a radar level gauge model, these characteristics need to be considered. Generally, high-frequency storage tank radar level meter are almost not affected by water vapor in the atmosphere.

3. The space for measuring the level of the dust removal slurry tank is usually small and complex, which may cause the radar level gauge to have false echoes during measurement. During the debugging process, attention should be paid to how to effectively filter out these false signals.

4. There are water spraying devices and stirring devices inside the dust removal slurry tank. When installing the storage tank radar level meter, these obstacles must be carefully avoided to avoid affecting the measurement accuracy.

The above is a brief analysis of the working conditions of the dust removal slurry tank level measurement in the sintering system. This knowledge is crucial before selecting and installing the radar level meter. Only by deeply understanding these working conditions can you choose the right model and ensure the accurate installation position.

In the batching system and sintering machine material layer, radar level meters are usually used for measurement. The former mainly measures slurry, while the latter mainly measures particles or blocks. According to actual needs and working conditions, engineers usually need to consult relevant sales staff to obtain suitable radar level meter recommendations.

These measures and suggestions can help ensure the effective use and accurate measurement of radar level meters and radar level meters in sintering systems.