Solve The Problem Of Radar Level Gauge in Oil Depot Storage Tank

When SOLIDAT engineers dealt with the fault of the tanks radar level gauge in the oil depot, they took a series of measures to ensure that the fault was effectively solved:

1. Verify the setting parameters: First, the engineer verified whether the full height setting value of the radar level gauge on the top of the oil tank was consistent with the liquid level setting value in the PLC program. It is found that inconsistent setting parameters may lead to inaccurate interface display, so make adjustments in time to ensure parameter consistency.

2. Check for display problems: Engineers check whether there are problems with the Oil depot radar level gauge display. If errors are found, further check other related parameters. If other parameters are confirmed to be normal, the engineer will promptly contact the tanks radar liquid level meter after-sales department to report the problem and avoid unauthorized disassembly to prevent damage to components.

3. Check the transmission line: Engineers carefully check the Radar level gauge failure signal transmission line to ensure that the transmission line is unobstructed and eliminate possible faults caused by line problems.

4. Measure the void height value on site: Engineers recommend using the Oil tanks radar level gauge to accurately measure the tank void height value on site to ensure measurement accuracy and provide a reliable reference for future tanks radar maintenance work.

Through the above series of meticulous operations and inspections, SOLIDAT engineers successfully solved the tanks radar level gauge failure and ensured the normal operation and production efficiency of the equipment.