Measurement Principle Of Externally Installed Density Meter For Slurry in Desulfurization System

Usually, the solid suspension meter is mainly used to measure the amplitude change of the received signal when the ultrasonic wave attenuates. In this case, although the amount of solid suspension is fixed, there are still various conditions due to the shape of the sensor or the influence of the velocity parallax, which may affect the stability and reliability of the solid suspension measurement.

The measurement principle of the SOLIDAT slurry density meter is to continuously vibrate the measuring tube at a certain resonance frequency, and change the vibration frequency according to the density change of the fluid. Therefore, the resonant frequency is a function of fluid density and a corresponding density output signal can be obtained. The SLDA2100 Extermal Mount Density Meter uses the seal energy averaging method, which is able to save the sealed received signal and calculate its energy, which is better than just changing the amplitude of the received signal.

The SLDA2100 Desulfurization slurry density meter uses the PCM (Process Condition Monitoring) method, which not only measures the size of the received signal (usually ultrasonic density meters only measure this signal), but also pays attention to the changes in sound speed and temperature during the process. At the same time, the slurry density meter also monitors the operating status of the measurement medium to determine the validity of each measurement data, thereby improving the stability and reliability of the measurement. Extermal Mount Density Meter By comprehensively considering factors such as sound speed, temperature and operating status, SLDA2100 can provide more accurate, stable and reliable measurement results.

In short, the SLDA2100 slurry density meter adopts the sealing energy averaging method and PCM method, as well as monitoring the operating status of the measurement medium, thus making significant progress in improving the stability and reliability of measurement. This makes SLDA2100 an effective, accurate and reliable measurement tool. Desulfurization slurry density meter is widely used in papermaking, electric power, metallurgy, mining, pharmaceuticals, wineries, pharmaceuticals, hydrology, environmental protection, water supply, sewage treatment and other industries.