Use microwave barriers to position, track and detect steel billets, thick steel plates and steel coils

In the harsh environment of high temperature, water vapor and high dust, microwave positioning and tracking detection of steel billets, thick steel plates and steel coils of continuous casting machines and steel rolling production lines is required. In this case, Point level detection with microwave barrier technology can be used.

1. Reflective Microwave positioning detection

A high thermal resistance oscillating and receiving antenna is used, a circular waveguide is used to conduct microwaves, and the microwaves emitted by the oscillating antenna are reflected to the object being detected, and the receiving antenna receives the reflected microwaves and outputs a detection signal. Microwave level switch manufacturer This technology adapts to the positioning, tracking and detection needs of steel equipment.

 

2. Inclined through-beam Microwave positioning detection

The Microwave level switch sensor is installed obliquely, which expands the area covered by the beam angle and is suitable for detecting thin steel plates and materials at a longer distance. At the same time, Microwave level switch manufacturer has an analog input function and can locate small objects.

 

3. Horizontally installed through-beam Microwave positioning detection

It is suitable for positioning large and thick steel billets, steel plates and other materials, and improves detection efficiency by shortening the distance between antennas as much as possible.

 

4. Waveguide type positioning detection

In working conditions with high concentration of water vapor and severe vibration, waveguide point level detection with microwave barrier technology can be used to accurately position the billet.