Explosion-proof Zirconium Oxide Oxygen Analyzer Installation: Detailed Explanation Of Flange Dimensions And Installation Steps

In response to the demand for explosive environments in the industrial field, the Explosion-proof zirconia oxygen analyzer uses advanced zirconium oxide sensor technology to accurately and stably measure oxygen content. The zirconium oxide oxygen analyzer is widely used in gas analysis and analysis in steel furnaces, kilns and other industries. Under monitoring.

In order to help users better install and use the instrument, the following is a detailed introduction to the flange dimensions and installation steps of the Zirconia oxygen detector:

1. Flange size:

The standard flange standard of the Explosion-proof zirconia oxygen analyzer is: flange outer diameter 165, screw hole pitch 125, screw hole diameter 18.

2. Installation flange short-circuit dimensions and steps

[1] Open a hole in the flue with a diameter equivalent to the outer diameter of the casing.

[2] Weld the casing to the flue and leave enough space to insert and tighten the safety bolt.

[3] Install the flange gasket and insert the zirconium oxide oxygen analyzer.

[4] Insert the safety bolts from the rear end of the casing flange into the casing flange, flange gasket and equipment mounting flange in sequence, install the screw washers and nuts and tighten them.

3. Zirconia oxygen detector installation steps:

1. Confirm the installation location: Select the appropriate installation location according to actual needs, and ensure that there is no explosion risk in the surrounding environment.

2. Install the flange: Connect the flange of the zirconium oxide oxygen analyzer to the pipe flange to ensure a tight fit, and secure it with bolts.

3. Connect the cable: Connect the cable of the oxygen analyzer to the control system and ensure that the wiring is correct.

4. Power supply interface: Connect the power supply cable to the power supply interface of the Explosion-proof zirconia oxygen analyzer and ensure that the power supply is stable and reliable.

5. Seal inspection: Check whether the flange connection is well sealed to ensure that gas will not leak.

6. Start the test: Follow the operating steps in the instruction manual to start the oxygen analyzer for testing to ensure that it is working properly.

Through the above installation steps, users can successfully complete the installation of zirconium oxide oxygen analyzer. Zirconia oxygen detector products bring more effective and safer gas analysis and monitoring solutions to the industrial field. In the future, this instrument will be widely used in chemical, petroleum and other industries to provide users with more reliable data support.