Application Notes For The Ultrasonic Level Meter Product Lines Of SolidAT
Aug 28, 2023| APPLICATION NOTES - LEVEL SENSORS & REMOTE MONITORING
|
# |
1. GAUGER SYSTEMS |
APPLICATION NOTES |
|
1.1 |
External Temperature Sensor |
Using Gauger level sensors with an external temperature sensor: advantages and guidelines. |
|
1.2 |
Gauger Sealing |
Keeping the Gauger high sealing rate during installation and maintenance. |
|
1.3 |
GaugerGSM - External GSM Antenna |
Replacing internal GSM antenna with an external antenna - for authorized distributords. |
|
1.4 |
External Battery Pack |
Operating GaugerGSM with an external battery pack and programmable switch (PTS). |
|
1.5 |
Control of 8-Relay Device |
Controlling an external 8-relay device with Gauger sensors. |
|
1.6 |
GaugerNET Component Architecture |
GaugerNET three server design: Listener, Presenter and Gateway. |
|
1.7 |
GaugerNET Modbus Implementation |
Implementation guidelines for Modbus clients interfacing GaugerNET Modbus Server. |
|
# |
2. MONOSCAN / MICROSCAN |
APPLICATION NOTES |
|
2.1 |
Remote display |
On the use of commercial 4-20 based remote displays with 2-wire level sensors. |
|
2.2 |
Open Channel Flow |
Configuration of MonoScan for Open Channel Flow measurements. |
|
2.3 |
Software features |
Advanced software configuration features for MonoScan level sensors. |
|
2.4 |
Installation Tips |
Hints for optimal physical installation of MonoScan and MicroScan level sensors. |
|
2.5 |
Error signals |
Setting error signals for SolidScan sensors. |
|
# |
3. SMARTSCAN |
APPLICATION NOTES |
|
3.1 |
SmartScan50 - Modbus |
Details on the implementation of Modbus protocol with SmartScan50 level sensors. |
|
3.2 |
SmartScan25 - Modbus |
Details on the implementation of Modbus protocol with SmartScan25 level sensors. |
|
3.3 |
Solid protocol |
Implementation details on the use of Solid protocol with SmartScan level sensors. |
|
3.4 |
Precut and Flexible Cables |
Explanation on SmartScan sensor cables: fixed precut and flexible option. |
|
3.5 |
Flexible cable |
Explanation on extending sensor cables in SmartScan systems. |
|
3.6 |
Open Channel Flow |
Configuring SmartScan level sensors for Open Channel Flow measurement. |
|
3.7 |
Enhanced capabilities |
Description of enhanced capabilities for SmartScan level sensors. |
|
3.8 |
Error signals |
Setting error signals for SmartScan level sensors. |
|
3.9 |
Cable lengths |
Options for different cable lengths in SmartScan level sensors. |
|
3.10 |
SmartLite |
Description of the SmartLite level sensor. |
|
3.11 |
Volume Configuration |
Configuring SmartScan50 for volume readings. |
|
3.12 |
Volume and Flow |
Configuring SmartScan50 for volume readings and for table based Open Channel Flow. |
|
# |
4. GENERAL ISSUES |
APPLICATION NOTES |
|
4.1 |
Gas Factor |
Configuring and using SolidAT sensors in various gas atmospheres. |
|
4.2 |
Mechanical Fitting |
Several aspects on mechanically fitting sensors for propoer installation. |
|
4.3 |
Sensor Application Guide |
Applying different sensors (transducers) to different applications. |
|
4.4 |
Sensors - ECTFE coating |
Characteristics of sensors coated with ECTFE. |
|
4.5 |
IP and NEMA |
Introduction on sealing rating including IP rating and NEMA rating. |
|
4.6 |
Tracking Rates |
Tracking rate capabilities of SolidAT Scan line products. |
|
4.7 |
Wireless Connection |
Connecting SolidAT level measurement products to an external wireless interface. |
|
4.8 |
Power Supply |
Recommendations related to power supplies feeding SolidAT sensor product lines. |
SUPPORTING MATERIALS for USERS, INTEGRATORS and DISTRIBUTORS
All technical documents are subject to change without notice. Where a description conflict exists between different versions of documents and languages, specifications of the English version in the User Manual should be used.