Analysis Of Multiple Applications Of Radar Level Meters in Soda Ash Production

Due to the specific requirements of the industry, many people often think that the production process of alkali is relatively simple. However, after in-depth research on relevant materials, we realized the complexity. In this production process, multiple barrels, tanks and silos are involved, and the application of radar level gauges and radar material level gauges is also particularly important. Next, we will discuss the actual working conditions of radar level gauges in soda ash plants.

Radar level gauges have important applications in all aspects of soda ash production. In the evaporation and carbonization section, the hot mother liquor barrel, cold mother liquor barrel, clarification barrel and caustic soda buffer tank all need to measure the liquid level; in the brine section, the crude brine tank, caustic soda tank, causticization tank and clarification tank also rely on the radar level gauge of the soda ash plant; and in the calcination section, the crystallizer also needs this equipment. After understanding these applications, which working conditions are more critical?

First of all, some of these working conditions are easy to crystallize and accompanied by stirring, some are volatile and have corrosion risks, and others have large fluctuations and fast flow. When choosing a radar level meter, it is necessary to select the appropriate type of radar level meter for different situations, avoid obstacles during installation, or take special measures to reduce the impact of fluctuations.

Secondly, the temperature of some working conditions is high, and a high-temperature radar level meter should be selected if necessary. At the same time, it is also necessary to pay attention to whether water vapor will be generated, because water vapor may affect the measurement effect.

The above is the overall situation of the application of radar level gauges in soda ash plants. For the specific type of radar level meter suitable for each working condition, technicians should consult the manufacturer, and the manufacturer will provide reasonable suggestions based on its rich experience.